While we likely have an option for you, there is no document or anything that tells us what size cutout or style of water heater you currently have. I am assuming when you say "instant" you mean tankless hot water heater. The Fogatti RV Tankless Water Heater # LSB44FR is a great option that uses gas to heat and fits a cutout that is 13" wide x 13" tall x 17-3/4" deep. You would also need the Camco RV Water Heater Temperature and Pressure Relief Valve # CAM10423 for insallation.
If you... view full answer...
The ply rating isn't altogether that important when it comes to ensuring the best tires. The most important things are to ensure you get a tire that is properly rated, which means ensuring that they exceed the GVWR of your 2017 Keystone Hideout, and to inflate the tire to the maximum cold psi. Doing this will give you the best performance, allowing the tire to wear slower.
There are a bunch of different models of '17 Keystone Hideout so I was unable to determine the size of your tires... view full answer...
From what I can find an L4 message could be that the fireplace is in display mode or that the flame brightness/level is at its highest setting. If you could send me more information (brand/model) of your fireplace I'd be able to narrow down the issue and find a solution. view full answer...
I recommend the Dexter E-Z Flex Suspension Kit for your 2020 Keystone Hideout 301DBS 5th Wheel camper. I was unable to determine the length of your current equalizers so you will need to measure them to ensure you find the correct kit.
The Dexter E-Z Flex Suspension Kit # K71-652-00 fits equalizers with a bolt hole to bolt hole center of 5-1/4" to 6-1/4"(see image).
The Dexter E-Z Flex Suspension Kit # K71-653-00 fits equalizers with a bolt hole to bolt hole center of 7-1/4" to 8-1/4"(see... view full answer...
Yes, the Adco Spare Tire Cover - 28" Diameter - Vinyl - Diamond Plate Item # 290-9756 will fit over your ST205/75D15. It will be a little over a half inch bigger in diameter but the elastic opening with a hollow-bead welt cord will ensure a snug fit with an easy installation. view full answer...
Yes, you can use the MORryde suspension upgrade kit with the Road Armor Shock Absorbing Equalizer Kit # LC696740.
The wet bolts will be the same 3-3/8" length, it's the shackle strap length you want to find to get the right kit. So just measure the shackle strap length on your 5th wheel, as you'll want the shackle straps to be the same length (or as close to it as possible), and there are two options for that:
- MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle... view full answer...
Since you have 3,500 lb trailer axles from Lippert the correct bearing kit is the part # BK2-100. This comes with bearings, races, and a seal for each hub plus a cotter pin and tang washer. Or we have the part # DBRKHW35EZ which comes with the correct bearings, seals, lug nuts, and dust covers for both sides of a 3,500 lb axle like you have. If you don't need the races or cotter pins (you probably don't) this would be the way to go. view full answer...
Go To Results